Step edge Ender with gutter for plank L

Our new step edge for plank L is universally applicable – whether as facing or finishing – with AVA’s leading edge it looks simply perfect. With this tread edge, you ensure slip resistance on your stairs/steps and create visually extremely appealing facings.

Neatly finish balcony or terrace floor profiles or use our leading edge for the construction of non-slip stair treads. You can build non-slip stairs, for example, with our floor profile Plank L in combination with the leading edge L. Alternatively, you can use our ready-made stair treads. These are screwed to the side and have an enormously high stability and load-bearing capacity.

These high-quality and unique step edges are also

• absolutely waterproof
• anti-slip
• gap-free
• shatterproof
• hard-wearing
• maintenance-free
• distortion and shrinkage free
• optimal for drainage without contamination
• and ideally suited for our all-weather flooring AVA Diele L

Easy to assemble:

Also the step edge Boards are designed as usual with our unique and innovative Safe Click System®.
Click System® designed. This means that the step edge boards can be installed easily and with considerable time savings and can be combined with the matching AVA floorboards.
time savings can be installed and used with the matching AVA planks.

And this is how it works:
FUNCTION 1: Use as edging
• First, the step edge profile plank L is screwed tight with the screw-on tab.
• Then the floor profiles, our AVA plank with the Safe Click System®, are simply clicked into place. Do this until the entire floor surface is covered with the floorboard.
• The finishing touch is now our finishing edge / leading edge with gutter. This is also simply clicked into place, providing a visually appealing and neat finish.
described above, repeated.

FUNCTION 2: Use for stairs
• First, the step edge profile beginner plank L is screwed to the support surface for the step.
• Then, one or more floor profiles of the AVA Plank L with the Safe Click System®, are placed on the support surface and simply clicked into the step edge.
• Finally, the step edge profile Ender Plank L is clicked into the plank L. This step edge profile now forms the safe tread edge of the step.

This version of the step edge plank L is supplied with the following dimensions:

• Length: 1000 mm, 1200 mm, 1500 mm, 2000 mm, 3000 mm, 6050 mm
• Deck width with screw-on tab: 35 mm (step edge beginner with screw-on tab plank L)
• Deck width with gutter: 43 mm (step edge Ender with gutter Plank L)
• Floor height 40 mm

Please note:
The aluminum profiles are 100% recyclable. Any aluminum residues that arise should be properly
disposed of or, if necessary, can be taken to a scrap metal dealer.
It is also possible to deliver the aluminium free of charge to the supplier for larger quantities.
Suppliers to hand over.

Care tip:
For professional cleaning of the aluminium profiles a conventional detergent and sufficient lukewarm water can be used.
lukewarm water should be used.